Requirements for clean room decoration |
Publisher: SOC (Jiangsu) Environmental Technology Co.,Ltd. | Hits: 270 | Published on: 2022-8-18 17:58:59 | Close |
Nowadays, the demand for dust-free workshops is increasing, and the requirements for dust-free workshops are also getting higher and higher. In the process of dust-free workshop decoration, it is necessary to ensure the construction quality and cleanliness. Below, Yantai Hongtao Decoration will share with you the requirements for the decoration of Yantai dust-free workshop. The floor of the dust-free workshop generally uses plastic sheets and coil surfaces, which should be classified according to specifications, sizes, and thicknesses during storage. There is air. The lighting system and ventilation need to be paid attention to at the decoration site of the clean room in Yantai. If the clean room is to be renovated, the power supply and toxic and harmful gases need to be identified and cut off before the construction can be carried out. During the decoration of the dust-free workshop, the decoration materials can temporarily enter and exit, and can be closed when not in use to prevent dust from entering the workshop. In the decoration of the clean room, it is necessary to ensure firmness. All components need to be connected to the main structure. Different materials are connected in different ways. Sealed with elastic material. Piping and wiring should be notched with appropriate width and depth. Pipeline and line pressure test to ensure no leakage during sealing. The floor of the dust-free workshop needs to be well-prepared for a waterproof layer and a moisture-proof layer. The gap in the dust-free workshop can be sealed with positive pressure. The skirting board can be flush with the wall or indented by 2-3MM during construction. |